Oreck XLS465 User Manual download pdf (Page 6)

A double-insulated appliance is marked with one or

more of the following: The words “Double Insulation”

or “Double Insulated” or the double-insulation symbol

( ). In a double-insulated appliance, two systems of

insulation are provided instead of grounding. No

grounding means is provided on a double-insulated

appliance, nor should a means for grounding be

added to the appliance. Servicing a double-insulated

appliance requires extreme care and knowledge of

the system and should be done only by qualified

service personnel. Replacement parts for a double-

insulated appliance must be identical to the parts

they replace.

POLARIZATION INSTRUCTIONS

To reduce the risk of electric shock, the ORECK

STEEMER model is equipped with a polarized

alternating current line plug (a plug having one

blade wider than the other). This plug will fit into

a polarized outlet only one way. This is a safety

feature. If you are unable to fit the plug fully into an

outlet, try reversing the plug. If the plug should still

fail to fit, contact a

qualified electrician to

replace the obsolete

outlet. Do not defeat the

purpose of the polarized

plug in any way.

Servicing of

ouble-Insulated A

ppliances

A.L.C.I

The ORECK STEEMER is made to double-insulated

specifications and is equipped with an A.L.C.I.

(Appliance Leakage Circuit Interrupter). The A.L.C.I.

shuts off the unit in potentially hazardous

situations. The A.L.C.I. has a Test and Reset button

which should be operated each time the unit is

plugged in. Do not remove the tag which provides

test instructions from around the cord at the A.L.C.I.

(A.L.C.I. may vary from illustration).

DANGER: Improper installation of A.L.C.I.

can result in electric shock.

Do not modify or by-pass the A.L.C.I. Do not replace

any electrical component in this product with

anything other than an authorized ORECK

replacement part. The risk of electric shock can result

if used in the vicinity of improperly grounded

stationary appliances (stove, refrigerator, washer,

etc.).

Polarized Plug

Test Button

Reset Switch

Instructional Tag

DO NOT REMOVE

Lift Out and Lower

Set-Up Cleaner

STEP 1: Swing the wheels

away from the nozzle into

the operating position.

Remove the two-tier tank

from the cleaner by

pinching the gray and red

latch together, and then

gently lowering the latch

toward the nozzle.

Do Not Force! (Figure 5)

STEP 2: Push the two-tier

tank downward toward

the nozzle and lift out

(Figure 6).

STEP 3: To fill the supply

tank with clean water,

open the gray tank cap.

Fill the tank with lukewarm

tap water to the fill line,

as noted on the side of the

tank (Figure 7).

The ORECK STEEMER cleaner is designed for fast

and easy set-up:

CAUTION: Do not overfill tank or use water that is

too hot to touch. Do not put any type of

shampoo/cleaner into the supply tank. Other carpet

shampoo will leave residues in the cleaner

that will over a short period of time clog the

dispensing system and void your warranty. Use only

STEEMER Full Release™ Professional Carpet

Cleaner cartridges, which are specifically

formulated to be residue-free.

Pinch

Latch

Fill Line

STEP 4: Close gray cap

and place the tank back

on the cleaner (Figure 8).

Lift the gray latch to slide

the tank upward into

position until you hear a

“click,” signaling that the

tank is securely locked

into place.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Oreck XLS465 User Manual Page 6

Comments to this Manuals

Related products and manuals for Vacuum cleaners Oreck XLS465